PoE Ethernet Switch 24 port 10/100/1000Mbps Network Switch with SFP
port
Overview
ND1024G,with 24 10/100/1000M auto-negotiation RJ45 port and 2
separate SFP optical fiber module extension slots.
Key features
Support 24 10/100/1000M auto-negotiation RJ45 ports
Support 2 10/100/1000M SFP port
Support IEEE 802.3x Flow Control for Full Duplex and back pressure
for half Duplex
Technical Specification
| ND-1024G |
| Standards and Protocols | IEEE 802.3,IEEE 802.3U |
| IEEE 802.3ab,IEEE 802.3x |
| Ports | 10/100/1000M | 24 |
| RJ45 ports |
| Gigabit SFP port | 2 |
| Indicators | Each port | Link/Ack |
| Each device | Power |
| Features | Stored and forward | Support |
| Bandwidth | 48Gbps |
| MAC address | 8K |
| Operating Environment | Operating Temperature:0℃～40℃ (32°F ~104°F) Storage Temperature:-40℃～70℃(-40°F~158°F) Operating Humidity:10%～90% RH( non-condensing) Storage Humidity:5%～90% RH (no-condensing) |
| Input Power | 100-240V,50/60Hz |
| Demersions(L×W×H) | 440mm×180mm×44mm |
User Guide:
Check the Network switch
Please check the enclosure,RJ45 ports,LED indicators ,sure they are
ok.
Connect the Network switch with power,make sure the initialization
of Network switch is available as below:
POW indicator is off at the beginning when power connected
POW indicator is on and keeps
Other indicators will be on ,then off after one or two seconds
2.Connection cables:
① Connected the Switch to Computer or other PD( like IP camera,
wireless AP) by CAT5 or 6 cables
② Connected the external power adapter to Switch and the power cord
to AC plug
③ Turn on the switch
Installation
LED Indicator:
| Name | Status | Indication |
Power | On (Green) | The Switch is powered on. |
| Off | The Switch is powered off. |
Link |
On (Yellow) | PD is connected correct and a valid link is established on the
port. |
Off | No PD is connected to the corresponding port or cable connect
incorrect or the CAT5 cables damaged |
| ACT | On(Green) |
PD is connected and work |
| Off | No network device or cable connected incorrect or the cables
damaged |
Caution:
1) All operation should be provided only by a qualified service
technician.
2) Please avoid any heavy thing placed on the Device.
3) Do not use this product near water, for example, in a wet
basement or near a swimming pool.
4) For outdoor use, the device itself should be housed inside a
protective enclosure.
5)Cutting power during a firmware upgrade can damage your device.
6)Only use attachments/accessories specified by the manufacturer.
7)Opening the switch or tampering with the warranty sticker can
void your warranty.
